IEC 63044-5-3:2017+AMD1:2022 CSV
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
Systemes électroniques pour les foyers domestiques et les bâtiments (HBES) et systèmes de gestion technique du bâtiment (SGTB) - Partie 5-3: Exigences CEM relatives aux HBES/SGTB destinés à être utilisés en environnement industriel
| Označení normy: | IEC 63044-5-3:2017+AMD1:2022 CSV |
| Vydáno: | 2022-06-16 |
| Edice: | 1.1 |
| ICS: | 29.120.01 |
IEC 63044-5-3:2017+AMD1:2022 CSV
IEC 63044-5-3:2017+AMD1:2022 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.
NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope.
This document is applicable (but not limited) to
- operator stations and other human–system interface devices,
- devices for management functions,
- control devices, automation stations and application-specific controllers,
- field devices and their interfaces,
- cabling and interconnection of devices,
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.