Cena s DPH / bez DPH
>UNE EN ISO 11916-3:2021 - Soil quality - Determination of selected explosives and related compounds - Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) (ISO 11916-3:2021) (Endorsed by Asociación Española de Normalización in November of 2021.)
sklademVydáno: 2021-11-01
UNE EN ISO 11916-3:2021 - Soil quality - Determination of selected explosives and related compounds - Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) (ISO 11916-3:2021) (Endorsed by Asociación Española de Normalización in November of 2021.)

UNE EN ISO 11916-3:2021

Soil quality - Determination of selected explosives and related compounds - Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) (ISO 11916-3:2021) (Endorsed by Asociación Española de Normalización in November of 2021.)

Calidad del suelo. Determinación de explosivos seleccionados y compuestos relacionados. Parte 3: Método mediante cromatografía líquida-espectrometría de masas en tándem (LC-MS/MS) (ISO 11916-3:2021) (Ratificada por la Asociación Española de Normalización en noviembre de 2021.)

Formát
Dostupnost
Cena a měna
Anglicky PDF
K okamžitému stažení
Tisknutelné
2368 Kč
Anglicky Tisk
Skladem
2368 Kč
Označení normy:UNE EN ISO 11916-3:2021
Počet stran:33
Vydáno:2021-11-01
Status:Norma
Popis

UNE EN ISO 11916-3:2021

This part of ISO 11916 specifies the measurement of explosives and related nitrocompounds (as given in Table 1) in soil and soil materials. This document is intended for the trace analysis of explosives and related compounds by liquid chromatography tandem mass spectrometry (LC-MS/MS). Generally, LCMS/ MS measurement shows the lower LOQ (limit of quantification) for each compound in Table 1 than that of high-performance liquid chromatography (HPLC) measurement. Under the conditions specified in this document, concentrations as low as 0,005 mg/kg to 0,014 mg/kgdry matter can be determined, depending on the substance. Similar compounds, in particular various nitroaromatics, by-products and degradation products of explosive compounds may be analyzed using this method. However, the applicability should be checked on a case-by-case basis.

: